- Safety in Industry
- Fire Safety
- Quality Management
Forthcoming dates and fees for courses for the remainder of 2019 and early 2020 are as follows. Please contact Vicki at Wenlock Health & Safety Ltd (WHS) on 01952 885885 or firstname.lastname@example.org to book.
Note that all courses will be held at our offices in Jackfield, Telford. However, if any organisation requires attendance by 6 or more employees, a specific course can be arranged at a date, time and location to suit. Please contact the WHS office to discuss your requirements and agree costs.
All course fees below include tea & coffee and all course literature. However, lunch is included on some, but not all, courses; it is important to check the details below.
Forthcoming dates for the WHS 1-day Emergency First Aid courses are as follows:
Duration: 1 day (6 hours)
Cost: £75 + VAT per person
Lunch is NOT provided
Cost: £85 + VAT per person
Please note the small price increase because LUNCH IS PROVIDED 2020 ONWARDS
WHS can also run the full 4-day First Aid at Work course for companies who need additional skills and wish to send 4+ candidates; contact Vicki for fees. However, do initially discuss first aid requirements with your own WHS consultant to assess whether the 4-day course is actually appropriate for your circumstances.
First Aid for Mental Health
Duration: 1 day Level 2 RQF (6 hours)
Cost: £75 + VAT per person
Lunch is provided
Previous courses sold out immediately so please book as soon as possible to be sure of securing places.
IOSH Managing Safely
Duration: 3 days
Cost: £395 + VAT per person
Lunch is provided
Please be aware that CITB specifies that candidates must be available to attend each session within the course; failure to do so may require a repeat course.
And attendance is vital, not only because it affects the candidate personally, but also because it can seriously affect others. As highlighted in the previous newsletter, because of CITB rules, we may be forced to cancel a course ON THAT MORNING if some candidates don’t turn up.
Forthcoming course dates are as follows; all CITB course fees include lunch.
Duration: 5 days; 1 day per week
Cost: £495 + VAT per person
Duration: 2 days
Cost: £265 + VAT per person (10% discount when booking 2 or more people)
Duration: 2 days
Cost: £230 + VAT per person (10% discount when booking 2 or more people)
Duration: 1 day
Cost: £160 + VAT per person (10% discount when booking 2 or more people)
Duration: 1 day
Cost: £125 + VAT per person (10% discount when booking 2 or more people)
Vibration – IMPORTANT
The HSE has revised the guidance document (L140) related to the Control of Vibration at Work Regulations 2005; this is downloadable free of charge from: http://www.hse.gov.uk/pubns/priced/l140.pdf
However, it is important to realise that the Regulations have not charged in any way and the basics of vibration risk assessment, the establishment of adequate monitoring and controls and the requirement for health surveillance still apply. Very few companies carry out proper vibration assessment, even fewer undertake health surveillance; ‘controls’ tend to consist of cursory monitoring of vibration exposure periods. WHS continually draws attention to the fact that the HSE is increasingly focusing on ‘harm’ issues such as manual handling and vibration and companies who do not comply with the Regulations may be subject to HSE enforcement. Refer to the prosecutions section at the end of the newsletter.
To assist with adequate vibration assessment, the HSE has also amended their Vibration Calculator to include a highly visible warning when exposure limits are likely to be exceeded. Go to: https://bit.ly/2kK0Jd2 for the new Vibration Calculator, the ‘Ready Reckoner’ and HSE guidance on how to use both. Use the Calculator to help assess the risks from your equipment and processes, but don’t forget to retain the results (print or save a screen shot) and issue appropriate instruction to your employees or the whole exercise will be pointless.
If you need further assistance, don’t hesitate to contact WHS; we’re here to help.
First-Aid – IMPORTANT
Although the Health and Safety (First-aid) Regulations 1981 have not changed, the HSE has issued fresh advice and a very useful means of assessing first-aid requirements. Go to:
http://www.hse.gov.uk/simple-health-safety/firstaid/index.htm and simply follow the steps.
Do note, however, that the advice given on the HSE’s website does now stress the need to include ‘mental health first-aid’; refer to: https://bit.ly/2kMFpUp
WHS runs regular certified mental health first-aid courses; page 1 of this newsletter gives details. Because of the recent emphasis on stress and mental health, both by the HSE and through the media, these courses do (commendably) sell out quickly. Contact WHS as soon as possible to book your place to ensure that mental issues within your workforce can be identified at an early stage and before it’s too late.
Why Wear Safety Eyewear?
Just take a look at the following link which clearly demonstrates why it is so vital to wear safety goggles whenever there is even the slightest chance of an eye injury: https://bit.ly/2n2iZPW
As the injured worker emphasises, why risk your safety for the sake of a £3 pair of safety goggles? So, to all construction workers….put away that bravado and think ‘safety first’. Your families will thank you!
Abrasive Wheels Training
The short video about eye wear also illustrates the importance of having good abrasive wheels training. Yes, the safety eyewear saved his sight, but the worker was still severely injured. And the cause? Listen to the video again.
Then ring WHS to book abrasive wheels training if any of your workers who use cutting or abrasive discs haven’t received the training within the last 3 – 5 years. It’s vital, and may save a life.
Legionella & CDM
As highlighted in the previous newsletter, WHS now offers Legionella Awareness training to ensure that project clients, managers, contractors and designers are able to properly acquaint themselves with the serious and very real risks of legionella (or Legionnaires Disease). Contact the WHS to book a course.
In the meantime, the following points about legionella are worth noting:
Legionella – General Comments
Consult HSG274 Parts 1, 2 & 3 for full details of legal requirements related the control of legionella in various water systems; go to: http://www.hse.gov.uk/pubns/books/hsg274.htm
and follow the links to the freely downloadable documents.
Legionnaires Disease is reportable to the HSE under RIDDOR, even if the patient is a member of the public visiting a premises such as a museum, water park, leisure centre, etc; these are deemed ‘work environments’ (i.e. people are employed there). Do note that the relevant local authority MUST also be notified in writing within 3 days of the verified OR SUSPECTED outbreak.
The Disease is not reportable under RIDDOR if the patient contracted the disease in a purely domestic environment and not as a result of any employed ‘work’ carried out.
Whilst on the subject of water systems, do note (as we have stressed on countless occasions) that poorly maintained and/or filthy welfare facilities (sanitation or canteen facilities) are totally unacceptable; they are unhealthy, illegal and may well result in HSE action being taken against the offending company, whether on site or at Head Office.
Despite our warnings, we STILL see disgusting welfare facilities in a variety of premises and several have, as predicted, recently resulted in HSE enforcement. And deservedly so as this example shows:
This company expected their visiting drivers to use this. What does this say about a company’s attitude to health & safety? The HSE agreed and issued a serious warning. Refer also to the prosecutions section at the end of the newsletter.
An important reminder that fire risk assessment is mandatory for ALL premises including ALL sites, and that suitable fire alarm and evacuation plans and procedures must then formulated and made known to all employees and visitors through induction or briefings and display.
And another reminder that these assessments, plans and procedures on construction sites (including refurbishments) need to be amended as work progresses. Escape routes may be obstructed, escape distances increased, fire stops and/or fire doors removed, etc as the project progresses so, of course, fire plans must change, employees and visitors re-inducted or re-briefed, and display material updated.
The legal requirement to ‘test’ the effectiveness of the plans also applies to ALL structures and is, arguably, even more important on construction sites as the structure and safe exit routes can be altered day by day.
As reported many times previously, the HSE is actively targeting fire systems on construction sites so take a good hard look at how you carry out fire risk assessment and organise effective fire alarm and evacuation procedures – particularly with high-rise and/or multi-occupancy structures where the risks are increased.
Telescopic Mobile Towers
WHS has encountered a growing number of these light-weight and easily-handled telescopic mobile towers on sites. Whilst these may present an easy solution to transporting and erecting work at height access equipment, WHS would stress the following:
Mobile towers must meet the standards of EN1004 so, unless the equipment is stamped with that verification, it cannot be guaranteed safe. And the mere fact that the equipment is ‘telescopic’ automatically compromises the safety standards laid down in EN1004, particularly the Safe Working Load. Therefore, this type of tower must be regarded as for light work only – and no side-loadings.
In addition, the outriggers are very small and, therefore, unless the equipment is positioned on very solid and totally level ground, stability cannot be guaranteed. Note that the tower in the photo needed to be positioned on board to ensure stability.
PASMA training (or suitable equivalent) must be given to all persons erecting mobile towers; PASMA does not include this type of equipment in its training as it does not meet EN1004. Indeed, PASMA actively advise against the use of such equipment.
As always, use of such equipment is subject to risk assessment; the judgement as to whether the equipment is suitable for the purpose intended is down to you. If in doubt, do not use this type of tower, no matter how quick easy and cheap it may be!
New Guidance on Dumpers
The Strategic Forum Plant Safety Group (SFPSG), which comprises the Construction Plant Hire Association, the Civil Engineering Contractors Association and the HSE, has recently published new practical guidance on the safe use of forward-tipping dumpers. This follows an increase in the number of fatalities and serious injuries resulting from spills and collisions, many of which could have been avoided with better training and awareness.
This is a very well-written and valuable document, and includes guidance on planning, supervision, driver competence, machine selection, exclusion zoning and the site environment. It’s a must-read for all civils, groundworks and highways contractors, and can be downloaded free of charge, together a wide variety of other guidance documents on safe plant use, from:
CSCS Cards – Important Changes
In early September, CSCS made a significant change to the requirements for card application. Previously, applicants did not have to pass the CITB’s Health, Safety & Environment Test if they held an industry-recognised qualification such as an NVQ or SVQ. In order to satisfy the Construction Leadership Council’s requirements aimed at ensuring a properly trained workforce, CSCS and its 35 partner schemes agreed that a minimum of the CITB test pass must be held for all cards.
Therefore, please note that exemptions NO LONGER APPLY. ALL applicants for new AND renewed cards MUST hold a pass for the correct level of CITB Health, Safety & Environment Test.
Please note also that, from 2020, CSCS will be paving the way for the withdrawal of cards issued under ’industry accreditation’ (also known as ‘grandfather rights’). Again, the aim is to ensure that, having operated CSCS for well over 20 years, we do actually move towards a properly qualified workforce – which, after all, was the original and very valid aim when the scheme was set up in the 1990s.
The industry accreditation route to card applications was closed to new applicants in 2010 but, as from 1 January 2020, any renewal of cards previously issued under industry accreditation will only be valid until 31 December 2024; NO such renewals will be processed after 30 June 2024.
Shortly therefore, ALL new and renewal applicants will be required to hold both an appropriate construction-related qualification AND a CITB test pass. So, take a good look at your workforce and make sure they either hold, or are working towards, the correct qualification/s BEFORE IT’S TOO LATE!
For further information about how to apply for a CSCS card, which card best applies to the role/s, and which qualification will be required, go to: https://www.cscs.uk.com
You will all be aware that safety and directional signs often have to be written in one or several languages these days. But please do get a fluent translator to write the text, and double check before issue.
To illustrate the point, take a look at this. If anyone of you can speak Welsh, you’ll already be laughing….
The Welsh text reads “ I am currently out of the office. Please submit any work to the translation team”!!!!
The Use of Drones
There has been a great deal of discussion recently about the potential harm that can be caused by unlicensed use of drones, an issue that should have been addressed by the government years ago.
However, the use of drones at work can also have huge beneficial effects because they are able to access areas that are either inaccessible to workers or present risks when doing so. For example, it is now commonplace to inspect high-rise structures and bridges remotely using drones. The operation is a fraction of the cost of traditional methods requiring the installation of access equipment, and eliminates the risks presented to those installing the access equipment, entering the confined space and carrying out the work.
Remember the basis of the General Principles of Prevention (risk assessment)? To ELIMINATE the risks is ALWAYS the first choice – and the use of drones for accessing hazardous environments can do this.
There are many companies now offering drone services; try Stag Communications:
With sincere thanks to the HSE for all photographs
In this newsletter, we concentrate on ‘health’ rather than injury. As we have stressed so many times before, the HSE has been actively targeting the ’health’ side of health & safety for several years now but WHS still sees poor, or even non-existent, controls which then often result in HSE enforcement.
Health is still not taken seriously within the construction industry as a whole, despite so many of our workers dying each year from asbestos-related diseases and silicosis, or becoming permanently disabled through excessive manual handling or prolonged exposure to noise, vibration, or hazardous substances. We at WHS know how difficult it is to control the health issues in an industry that relies on its workforce for the majority of operations. However, legislation has been around for 15, 25, even 45 years to prevent health risks and, with all the equipment available these days to combat such issues, not to mention CDM requirements to combat health risks at design stage, there is no excuse for NOT properly controlling health risks to the workforce.
In addition – please note – the Director of Celtic Rock Services Ltd was given a 12-week suspended custodial sentence, a 12 week curfew (how embarrassing is that?!) and ordered to pay £3,560 costs.
We question how many local authorities and grounds maintenance employers do actually try to reduce risks from vibration to their employees; it is likely that we will see many more court cases.
Following from the article above:
Be warned – provision of decent welfare and the stocking of adequate consumables has been LAW for construction sites since 1996!
Despite being served an Improvement Notice to improve controls, the Company was then found to be acting in exactly the same way on a subsequent project, prompting the prosecution.
The risk and COSHH assessments were found to be inadequate, no extraction systems were in place and, although respiratory protection was provided, its use was not enforced and workers had not been properly trained
And, inevitably…there’s asbestos
As this photo shows, the results were shocking! And this case goes to prove that the Client (i.e. the instigator of any ‘construction’ work) is well and truly responsible for the safety of his workers and anyone else affected in this case, the public)
Apparently, the extra work required to remove the asbestos identified in the survey would have increased the costs and timescale, and the Director therefore chose to ignore the issue! Was it really worth the risks, not only to the health of his employees, but to his and the Company’s pockets?
WHS is working for you; help us to help you.
Our aim is to keep people safe and to keep your company working.
To contact WHS, ring: 01952-885885
Get in touch today to discuss
your Health & Safety needs.